Fireboxes
MONOKOTE fire spray is a leading passive fire protection solution for commercial structural steel that has been used globally for decades. Monokote fire spray systems offer full compliance pathways for internal, semi-exposed and external steelwork. Tested and assessed in accordance with AS1530.4-2014 with an AS4100 regression report for steel protection. Specifically designed for the fire protection of steel structures however MONOKOTE MK6 fire spray is also approved for the fire protection of ductwork and concrete upgrades.
FyreWrap is a lightweight wrap offering high temperature insulation and performance. Each roll is fully encapsulated in Aluminium foil providing tear-resistance and antibacterial resistance along with a clean and professional look. Fyrewrap is ideal for off-site fabrication and fire protection of ductwork systems and has a patent fire-rated access panel to augment the overall fire-rated duct system. Tested and approved for duct in accordance with AS/NZS 1530.4-2014 and compliant to AS2419 for steel pipe hanger and support protection and AS2419 for copper hydrant protection. FyreWRAP is clean and simple to install, with minimal prep or cleanup required as compared to traditional fire spray protection.
CAFCO 300 is a spray or trowel applied premix, based on vermiculite and gypsum. Steel structures protected with CAFCO 300 have undergone fire resistance tests up to 240 minutes in approved independent laboratories to recognised Australian standards AS 4100 and AS1530.4: 2014. Cafco 300 has been one of the most recognisable products across the Australian construction industry for decades, making it a reliable choice for builders, architects, and engineers alike with multiple fire tests and assessments specific to the Australian market. Cafco 300 is used to protect structural steel and ductwork and upgrade the fire resistance rating of walls and slabs. Approvals of up to 240 minutes on steel sections and 180 minutes for ductwork.
PROMASIL-1100 SUPER are large-size, lightweight insulating boards with very good thermal properties. PROMASIL -1100 SUPER is the replacement for the VERMICULUX board and can be used in a majority of its applications. Promasil board has multiple uses including fire damper protection, penetration seals and 1, 2 & 3-sided bulkheads of up to 120 minutes FRL from both directions. This versatile fire rated board is also used to build service enclosures, protect mechanical ductwork, and fabricate fire-rated access panels. Promasil 1100 is also compatible with Promat’s large suite of firestopping products.
BOSS Cable Transits CT120 & CT240 are designed to prevent the spread of fire and smoke from one compartment to another where electrical power, data and comms cables penetrate through separating walls and floors.
The Cable Transit CT120 & CT240 mounting flange provides a quick and easy method of installing single or multiple Cable Transits, even in plasterboard partitions. The unique design means BOSS Cable Transits clamp to the wall using metal flanges. By using larger flanges, multiple Cable transits can be banked together alongside each other, providing fire rated penetrations for multiple cable bundles, and with added changeability for future additions or alterations. The unit has a hinged split body which provides an easy retro-fit option where cables are pre-installed. Tested and approved to AS1530.4 and AS4072.1.
The BOSS FyreBox is revolutionising firestopping methods for large bundles of mixed services. Designed to allow large bundles of pipes and cables to all pass through one single fire rated enclosure, the BOSS FyreBox is the only tested and proven method of firestopping multiple services with such simplicity of installation and ease of compliance. Commonly used for apartment entry configurations above an entry door to an SOU, the BOSS FyreBox is also suited for service risers, shafts, plant areas and data rooms in a variety of residential, commercial and industrial buildings. The new generation of BOSS FyreBox is tested and approved to AS1530.4: 2014 and AS4072.1-2005 for 30-, 60-, 90- and 120-minute configurations on a large variety of services. New approvals include a wider variety of wall, concrete slab & floor/ceiling systems.
The Trafalgar FyreBOX Cast-In is a simple multi-service passive fire penetration system that can be cast directly into the floor slabs of a building that will prevent the spread of fire through service penetrations whilst reducing the footprint needed for riser shafts and cupboards. The FyreBOX Cast-In is an intumescent lined system designed to prevent the spread of fire through service penetrations. The FyreBOX Range has been tested to AS1530.4-2014 in various slab thicknesses for a range of mixed services with FRLs of up to -/240/240 for certain systems. Allows multiple and mixed services to pass through one opening in any quantity or configuration.
Applications:
- Electricians: Power, data cables, conduits
- Plumbers: Steel and copper pipes, PVC pipes, PEX pipes, PEX-AL-PEX pipes
- HVAC&R: Insulated pipes
- Active Fire: Sprinkler pipes, fire cables
The FyreBOX Maxi is a retro-fit multi-service penetration system designed to prevent the spread of fire through small or large service penetrations, in the smallest footprint possible. The FyreBOX Maxi is an intumescent lined system designed to prevent the spread of fire through service penetrations. The FyreBOX Range has been tested to AS1530.4-2014 in Hebel, single/double layer plasterboard, Speedpanel and many other common wall/floor systems. A wide range of mixed services are approved with FRLs of up to -/240/240 for certain systems. Allows multiple and mixed services to pass through one opening in any quantity or configuration.
Applications:
- Electricians: Power, data cables, conduits
- Plumbers: Steel and copper pipes, PVC pipes, PEX pipes, PEX-AL-PEX pipes
- HVAC&R: Insulated pipes
- Active Fire: Sprinkler pipes, fire cables
The FyreBOX Mini is a retro-fit multi-service penetration system designed to prevent the spread of fire through small or large service penetrations, in the smallest footprint possible. The FyreBOX Mini is an intumescent lined system designed to prevent the spread of fire through service penetrations. The FyreBOX Range has been tested to AS1530.4-2014 in Hebel, single/double layer plasterboard, Speedpanel and many other common wall/floor systems. A wide range of mixed services are approved with FRLs of up to -/240/240 for certain systems. Allows multiple and mixed services to pass through one opening in any quantity or configuration.
Applications:
- Electricians: Power, data cables, conduits
- Plumbers: Steel and copper pipes, PVC pipes, PEX pipes, PEX-AL-PEX pipes
- HVAC&R: Insulated pipes
- Active Fire: Sprinkler pipes, fire cables
The Trafalgar Slab Mounted FyreBOX has been designed and tested to be built into residential/commercial apartment walls and riser shafts, reducing the space required for service penetrations and providing predictable site costs and a reliable method of fire stopping. The FyreBOX Slab-Mount is an intumescent lined system designed to prevent the spread of fire through service penetrations. The FyreBOX Slab-Mount has been tested to AS1530.4-2014 in Hebel and single layer plasterboard wall systems. A wide range of mixed services are approved with FRLs of up to -/240/240 for certain systems. Allows multiple and mixed services to pass through one opening in any quantity or configuration.
Applications:
- Electricians: Power, data cables, conduits
- Plumbers: PEX pipes, PEX-AL-PEX pipes
- HVAC&R: Insulated pipes
- Active Fire: Sprinkler pipes, fire cables
Tested as part of the FyreBOX range, the circular shape of Trafalgar’s SuperSTOPPER has been engineered and sized to allow for quick, neat, and cost-effective holes to be made in fire barriers. Whether it is a core hole in a concrete floor slab or a hole saw in a plasterboard wall; openings can be prepared to suit the inclusion of a SuperSTOPPER Circular for mixed services. Trafalgar’s SuperSTOPPER Circular allows multiple and mixed services in any quantity or configuration to pass through one opening in walls, shafts, floors, and ceilings. Thoroughly tested to AS1530.4-2014 in Hebel, single/ double layer plasterboard, Speedpanel and many other common wall, floor and ceiling systems
Applications:
- Electricians: Power, data cables, conduits
- Plumbers: Steel and copper pipes, PVC pipes, PEX pipes, PEX-AL-PEX pipes
- HVAC&R: Insulated pipes
- Active Fire: Sprinkler pipes, fire cables
Tested as part of the FyreBOX range, the SuperSTOPPER Square Mini is an advanced retrofit multi-service penetration system engineered to effectively contain and prevent the spread of fire through narrow service penetrations, all within a remarkably compact design. Whether it is a core hole in a concrete floor slab or a hole saw in a plasterboard wall; openings can be prepared to suit the inclusion of a SuperSTOPPER Square Mini for mixed services. Trafalgar’s SuperSTOPPER Mini allows multiple and mixed services in any quantity or configuration to pass through one opening in walls, shafts, floors, and ceilings. Thoroughly tested to AS1530.4-2014 in Hebel, single/ double layer plasterboard, Speedpanel and many other common wall, floor and ceiling systems.
Applications:
- Electricians: Power, data cables, conduits
- Plumbers: Steel and copper pipes, PVC pipes, PEX pipes, PEX-AL-PEX pipes
- HVAC&R: Insulated pipes
- Active Fire: Sprinkler pipes, fire cables
The FyreBOX Maxi is a retrofit multi-service penetration system designed to prevent the spread of fire through small or large service penetrations, in the smallest footprint possible. FyreBOX has been tested rigorously with a range of mixed service types and bundles in common wall and floor types and is one of the most fire-tested products in the world, with industry-leading FRL’s of up to -/240/240 (system specific).
The BOSS FyreBox™ is revolutionising firestopping methods for large bundles of mixed services. Designed to allow large bundles of pipes and cables to all pass through one single fire rated enclosure, the BOSS FyreBox™ is the only tested and proven method of firestopping multiple services with such simplicity of installation and ease of compliance. Commonly used for apartment entry configurations above an entry door to an SOU, the BOSS FyreBox™ is also suited for service risers, shafts, plant areas and data rooms in a variety of residential, commercial, and industrial buildings.
Trafalgar FyreBOX Cast-In is a simple multi-service passive fire penetration system that can be cast directly into the floor slabs of a building that will prevent the spread of fire through service penetrations whilst reducing the footprint needed for riser shafts and cupboards.
